gfetchnews-0.2/0042755000175000017500000000000007315700334012554 5ustar henryhenrygfetchnews-0.2/gfetchnews.pas0100644000175000017500000004260107315632614015421 0ustar henryhenryprogram gfetchnews; {$MODE DELPHI} uses glib,gdk,gtk,nntp,linux,sysutils,classes; procedure pm;forward; procedure msgbox1b(msg:string);forward; procedure mlp(msg: string);forward; procedure mboxcreate(head,body: TStringlist; var mboxfile:TStringlist);forward; procedure GetConfig;forward; type TConfig = record nntpserver: string; nntpport: integer; authuser: string; authpass: string end; var window, fetchbutton,ssbutton,confbutton,postbutton, getlistbutton,quitbutton,progress,mainlabel,vbox,hbox: pGtkWidget; {GtkWidget is the storage type for widgets} kdialog,table,serverlbl,portlbl,userlbl,passlbl, serverent,portent,userent,passent,kbutton: pGtkWidget; ngdialog,ngbutton,nglabel,nglabel3,nglist,ngselect,ngselnum, vscrollbar,ngtable,ngtable2: pGtkWidget; Config: TConfig; home,conffile,newsrc: string; procedure GetConfig; var cz,ev: string; XPC: text; begin AssignFile (XPC,conffile); reset(XPC); while not eof(XPC) do begin readln(XPC, cz); if (pos('NntpServer',cz)=1) then begin ev:=copy(cz,pos('=',cz)+1,80); Config.nntpserver:=trim(ev); end; if (pos('NntpPort',cz)=1) then begin ev:=copy(cz,pos('=',cz)+1,80); Config.nntpport:=StrToInt(trim(ev)); end; if (pos('NntpUser',cz)=1) then begin ev:=copy(cz,pos('=',cz)+1,80); Config.authuser:=trim(ev); end; if (pos('NntpPass',cz)=1) then begin ev:=copy(cz,pos('=',cz)+1,80); Config.authpass:=trim(ev); end; end; closefile(XPC); end; procedure mboxcreate(head,body: TStringlist; var mboxfile: TStringlist); var fadr,s: string; c: char; i,p,z,cz: integer; mbfailed: boolean; begin mbfailed:=true; for i:=0 to head.count-1 do begin if (pos('From:',head.strings[i])=1) and (pos('@',head.strings[i])>0) then begin p:= pos('@',head.strings[i]); fadr:='@'; z:=1; s:=copy(head.strings[i],p-z,1); c:=s[1]; cz:=ord(c); while not (cz=60) and not (cz=58) and not (cz<46) and not(cz>122) do begin fadr:=c+fadr; z:=z+1; s:=copy(head.strings[i],p-z,1); c:=s[1]; cz:=ord(c); end; z:=1; p:= pos('@',head.strings[i]); s:=copy(head.strings[i],p+z,1); c:=s[1]; cz:=ord(c); while not (cz=62) and not(cz<46) and not(cz>122) and not((p+z)>length(head.strings[i])) do begin fadr:=fadr+c; z:=z+1; mbfailed:=false; try s:=copy(head.strings[i],p+z,1); c:=s[1]; cz:=ord(c); except break; end; end; end;{if} end;{for} if mbfailed then fadr:='noone@gfetchnews'; fadr:='From '+fadr+' '+FormatDateTime('ddd mmm dd hh:nn:ss yyyy',now); mboxfile.clear; mboxfile.add(fadr); for i:=0 to head.count-1 do begin mboxfile.add(head.strings[i]); end; mboxfile.add(''); for i:=0 to body.count-1 do begin mboxfile.add(body.strings[i]); end; mboxfile.add(''); end; procedure msgbox1b(msg:string); var fdlabel,fdialog,fdbutton: pGtkWidget; begin fdialog:=gtk_dialog_new(); fdlabel:= gtk_label_new(pchar(msg)); fdbutton := gtk_button_new_with_label ('OK'); gtk_box_pack_start_defaults(GTK_BOX(GTK_DIALOG(fdialog)^.vbox), fdlabel); gtk_box_pack_start_defaults(GTK_BOX(GTK_DIALOG(fdialog)^.action_area),fdbutton); gtk_widget_show (fdlabel); gtk_widget_show (fdbutton); gtk_signal_connect_object (GTK_OBJECT (fdbutton), 'clicked', GTK_SIGNAL_FUNC (@gtk_widget_destroy),GTK_OBJECT (fdialog)); gtk_widget_show (fdialog); end; procedure mlp(msg: string); begin gtk_label_set_text(pGTKLABEL(mainlabel), pchar(msg)); pm; end; procedure pm; begin while (gtk_events_pending>0) do begin gtk_main_iteration(); end; end; function dosubscribe(widget : pGtkWidget ; event: pGdkEvent; data: pgpointer ):boolean; cdecl; var selng, fnum: string; NRC: text; begin selng:=gtk_entry_get_text(PGtkEntry(ngselect)); fnum:=gtk_entry_get_text(PGtkEntry(ngselnum)); if not FileExists(newsrc) then begin Assign(NRC, newsrc); rewrite(NRC); close(NRC); end; Assign(NRC, newsrc); Append(NRC); writeln(NRC, selng+' -'+fnum); close(NRC); msgbox1b('Subscribed to '+selng+#10+'initially fetch '+fnum+' articles'); dosubscribe:=true; end; function writeconfig(widget : pGtkWidget ; event: pGdkEvent; data: pgpointer ):boolean; cdecl; var conflist: TStringList; begin conflist:=TStringlist.create; conflist.add('NntpServer='+gtk_entry_get_text(PGtkEntry(serverent))); conflist.add('NntpPort='+gtk_entry_get_text(PGtkEntry(portent))); conflist.add('NntpUser='+gtk_entry_get_text(PGtkEntry(userent))); conflist.add('NntpPass='+gtk_entry_get_text(PGtkEntry(passent))); conflist.savetofile(conffile); conflist.free; GetConfig; writeconfig:=true; end; function deleteW(widget : pGtkWidget ; event: pGdkEvent; data: pgpointer ): integer; cdecl; begin gtk_main_quit(); deleteW:=0; end; function konfig(widget : pGtkWidget ; event: pGdkEvent; data: pgpointer ): boolean; cdecl; begin kdialog:=gtk_dialog_new(); serverlbl:= gtk_label_new(pchar('News server')); portlbl:= gtk_label_new(pchar('Port')); userlbl:= gtk_label_new(pchar('Username (only if auth. required) ')); passlbl:= gtk_label_new(pchar('Userpass (only if auth. required) ')); table:=gtk_table_new (4, 2, FALSE); serverent:=gtk_entry_new(); portent:=gtk_entry_new(); userent:=gtk_entry_new(); passent:=gtk_entry_new(); kbutton := gtk_button_new_with_label ('OK'); gtk_box_pack_start_defaults(GTK_BOX(GTK_DIALOG(kdialog)^.action_area),kbutton); gtk_box_pack_start_defaults(GTK_BOX(GTK_DIALOG(kdialog)^.vbox), table); gtk_table_attach_defaults (GTK_TABLE(table), serverlbl, 0, 1, 0, 1); gtk_table_attach_defaults (GTK_TABLE(table), portlbl, 0, 1, 1, 2); gtk_table_attach_defaults (GTK_TABLE(table), userlbl, 0, 1, 2, 3); gtk_table_attach_defaults (GTK_TABLE(table), passlbl, 0, 1, 3, 4); gtk_table_attach_defaults (GTK_TABLE(table), serverent, 1, 2, 0, 1); gtk_table_attach_defaults (GTK_TABLE(table), portent, 1, 2, 1, 2); gtk_table_attach_defaults (GTK_TABLE(table), userent, 1, 2, 2, 3); gtk_table_attach_defaults (GTK_TABLE(table), passent, 1, 2, 3, 4); gtk_entry_set_text (GTK_ENTRY (serverent), pchar(Config.nntpserver)); gtk_entry_set_text (GTK_ENTRY (portent), pchar(IntToStr(Config.nntpport))); gtk_entry_set_text (GTK_ENTRY (userent), pchar(Config.authuser)); gtk_entry_set_editable(PGtkEntry(serverent),gboolean(true)); gtk_entry_set_editable(PGtkEntry(portent),gboolean(true)); gtk_entry_set_editable(PGtkEntry(userent),gboolean(true)); gtk_entry_set_editable(PGtkEntry(passent),gboolean(true)); gtk_entry_set_visibility(PGtkEntry(passent),gboolean(false)); gtk_signal_connect (pGTKOBJECT (kbutton), 'clicked', GTK_SIGNAL_FUNC (@writeconfig), NULL); gtk_signal_connect_object (GTK_OBJECT (kbutton), 'clicked', GTK_SIGNAL_FUNC (@gtk_widget_destroy),GTK_OBJECT (kdialog)); gtk_widget_show_all(kdialog); konfig:=true; end; function subngliste(widget : pGtkWidget ; event: pGdkEvent; data: pgpointer ): boolean; cdecl; var ngl: TStringlist; i: LongInt; begin ngl:=TStringlist.create; nbl:=home+'/.gfnews.bl'; try ngl.loadfromfile(nbl); except msgbox1b('ERROR: Newsgrouplist '+nbl+' not found!'); ngl.free; exit; end; ngdialog:=gtk_dialog_new(); ngbutton:=gtk_button_new_with_label ('OK'); nglabel:= gtk_label_new(pchar('Select Newsgroup and paste it here')); nglabel3:= gtk_label_new(pchar('Initial fetch how many articles:')); nglist:= gtk_text_new (nil, nil); ngselect:=gtk_entry_new(); ngselnum:=gtk_entry_new(); vscrollbar:=gtk_vscrollbar_new (GTK_ADJUSTMENT(GTK_TEXT(nglist)^.vadj)); ngtable:=gtk_table_new (2, 2, FALSE); ngtable2:=gtk_table_new (2, 2, TRUE); gtk_table_set_row_spacing(pGTKTABLE(ngtable),0,2); gtk_table_set_col_spacing(pGTKTABLE(ngtable),0,2); gtk_entry_set_editable(PGtkEntry(ngselect),gboolean(true)); gtk_entry_set_editable(PGtkEntry(ngselnum),gboolean(true)); gtk_entry_set_text (GTK_ENTRY (ngselnum), pchar('0')); gtk_box_pack_start_defaults(GTK_BOX(GTK_DIALOG(ngdialog)^.action_area),ngbutton); gtk_box_pack_start_defaults(GTK_BOX(GTK_DIALOG(ngdialog)^.vbox), ngtable); gtk_box_pack_start_defaults(GTK_BOX(GTK_DIALOG(ngdialog)^.vbox), nglabel); gtk_box_pack_start_defaults(GTK_BOX(GTK_DIALOG(ngdialog)^.vbox), ngselect); gtk_box_pack_start_defaults(GTK_BOX(GTK_DIALOG(ngdialog)^.vbox), ngtable2); gtk_table_attach_defaults (GTK_TABLE(ngtable), nglist, 0, 1, 0, 1); gtk_table_attach (GTK_TABLE(ngtable), vscrollbar, 1, 2, 0, 1,GTK_FILL,GTK_EXPAND or GTK_SHRINK or GTK_FILL,0,0); gtk_table_attach_defaults (GTK_TABLE(ngtable2), nglabel3, 0, 1, 0, 1); gtk_table_attach_defaults (GTK_TABLE(ngtable2), ngselnum, 1, 2, 0, 1); for i:=0 to ngl.count -1 do begin gtk_text_insert (GTK_TEXT(nglist), nil, nil, nil,pchar(ngl.strings[i]+#10),-1); end; gtk_signal_connect (pGTKOBJECT (ngbutton), 'clicked', GTK_SIGNAL_FUNC (@dosubscribe), NULL); gtk_signal_connect_object (GTK_OBJECT (ngbutton), 'clicked', GTK_SIGNAL_FUNC(@gtk_widget_destroy),GTK_OBJECT (ngdialog)); gtk_widget_show_all(ngdialog); subngliste:=true; ngl.free; end; function postnews(widget : pGtkWidget ; event: pGdkEvent; data: pgpointer ): boolean; cdecl; var g1:PGlob; artcl: TStringlist; s: string; begin artcl:=TStringlist.create; s:=home+'/gfnewsout/n*.out'; g1:=glob(s); if LinuxError=0 then begin if not nntp_connect(Config.nntpserver,Config.nntpport) then begin mlp('ERROR: Could not connect'); exit; end; mlp('Connected to '+Config.nntpserver); pm; if not(Config.authpass='') then begin if not nntp_auth(Config.authuser,Config.authpass) then begin mlp('ERROR: Authentification failed'); nntp_quit; exit; end; end; while g1<>nil do begin s:=g1^.name; if pos('/',s)=0 then s:=home+'/gfnewsout/'+s; writeln(s); artcl.clear; artcl.LoadFromFile(s); if not nntp_post(artcl) then begin mlp('ERROR: Could not post article '+s); end else begin mlp('Article '+s+' posted'); DeleteFile(s); end; g1:=g1^.next; end; globfree(g1); end; artcl.free; mlp(''); postnews:=true; end; function fetchnews(widget : pGtkWidget ; event: pGdkEvent; data: pgpointer ): boolean; cdecl; var rclist,head,body,mboxfile: TStringlist; i,j,k,article,Artikel,gelesen,count,prozent: integer; nindex,lastread,first,last,gesamt: longint; ngroupzeile,ngroup,groupfile: string; GF: text; f: single; begin gtk_widget_show(progress); rclist:=TStringlist.create; head:=TStringlist.create; body:=TStringlist.create; mboxfile:=TStringlist.create; rclist.clear; rclist.loadfromfile(newsrc); if not nntp_connect(Config.nntpserver,Config.nntpport) then begin mlp('ERROR: Could not connect'); exit; end; mlp('Connected to '+Config.nntpserver); pm; if not(Config.authpass='') then begin if not nntp_auth(Config.authuser,Config.authpass) then begin mlp('ERROR: Authentification failed'); nntp_quit; exit; end; end; j:=rclist.count-1; { !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Hauptschleife !! } for i:= 0 to j do begin {writeln(rclist.strings[i]);} ngroupzeile:=rclist.strings[i]; if (ngroupzeile='') then break; nindex:=StrToInt(copy(ngroupzeile,pos(' ',ngroupzeile)+1,80)); ngroup:=copy(ngroupzeile,1,pos(' ',ngroupzeile)-1); lastread:=0; mlp('Now reading newsgroup '+ngroup); lastread:=nindex; if not nntp_chgroup(ngroup,gesamt,first,last) then begin mlp('no such group '+ngroup); break; end; if (lastread<0) then lastread:=last+lastread; if (lastread<1) then lastread:=last; if (lastread=last) do begin head.clear; if not nntp_gethead(article,head) then begin mlp('Could not read article '+IntToStr(article)); article:=article+1; count:=count+1; continue; end; body.clear; if not nntp_getbody(article,body) then begin mlp('Could not read article '+IntToStr(article)); article:=article+1; count:=count+1; continue; end; mboxfile.clear; mboxcreate(head,body,mboxfile); for k:=0 to mboxfile.count -1 do begin writeln(GF,mboxfile.strings[k]); end; article:=article+1; count:=count+1; Prozent:=gelesen-count; f:=Prozent/gelesen; Prozent:=100-Round(f*100); gtk_progress_set_format_string(GTK_PROGRESS(progress),pchar(IntToStr(count)+' of '+IntToStr(gelesen)+' articles processed ('+IntToStr(Prozent)+'%%)')); gtk_progress_configure(GTK_PROGRESS(progress),Prozent,0,100); pm; end;{while} Close(GF); rclist.strings[i]:=ngroup+' '+IntToStr(last); end; {Hauptschleife} mlp('Disconnecting'); nntp_quit; rclist.savetofile(newsrc); rclist.free; head.free; body.free; mboxfile.free; fetchnews:=true; gtk_widget_hide(progress); end; function ngliste(widget : pGtkWidget ; event: pGdkEvent; data: pgpointer ): boolean; cdecl; var nbl,server: string; begin server:=Config.nntpserver; nbl:=home+'/.gfnews.bl'; if not nntp_connect(server,Config.nntpport) then begin writeln ('Could not connect'); exit; end; mlp('Connected to '+server); pm; if not nntp_list(nbl) then begin mlp('Could not get GroupList'); exit; end; mlp('Disconnecting'); nntp_quit; msgbox1b('newsgroups were saved to '+nbl); ngliste:=true; end; begin home:=trim(GetEnv('HOME')); if not fileexists (home+'/gfnewsout') then CreateDir(home+'/gfnewsout'); if not fileexists (home+'/gfnewsin') then CreateDir(home+'/gfnewsin'); conffile:=home+'/.gfnewsrc'; newsrc:=home+'/.gfnews.rc'; Config.nntpserver:='localhost'; Config.nntpport:=119; Config.authuser:=''; Config.authpass:=''; if fileexists(conffile) then GetConfig; {!!!!!!!!!!!!!!!!!!!!! GTK Kram !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!} gtk_init (@argc, @argv); window := gtk_window_new (GTK_WINDOW_TOPLEVEL); progress:=gtk_progress_bar_new(); vbox := gtk_vbox_new(FALSE,2); hbox := gtk_hbox_new(FALSE,2); mainlabel := gtk_label_new('Welcome to GFetchnews'); fetchbutton := gtk_button_new_with_label ('Fetch News'); ssbutton := gtk_button_new_with_label ('Subscribe'); confbutton := gtk_button_new_with_label ('Config'); postbutton := gtk_button_new_with_label ('Post articles'); getlistbutton := gtk_button_new_with_label ('Get newsgroup list'); quitbutton := gtk_button_new_with_label ('Quit'); gtk_signal_connect (pGTKOBJECT (window), 'delete_event', GTK_SIGNAL_FUNC (@deleteW), NULL); gtk_signal_connect (pGTKOBJECT (getlistbutton), 'clicked', GTK_SIGNAL_FUNC (@ngliste), NULL); gtk_signal_connect (pGTKOBJECT (fetchbutton), 'clicked', GTK_SIGNAL_FUNC (@fetchnews), NULL); gtk_signal_connect (pGTKOBJECT (quitbutton), 'clicked', GTK_SIGNAL_FUNC (@deleteW), NULL); gtk_signal_connect (pGTKOBJECT (postbutton), 'clicked', GTK_SIGNAL_FUNC (@postnews), NULL); gtk_signal_connect (pGTKOBJECT (confbutton), 'clicked', GTK_SIGNAL_FUNC (@konfig), NULL); gtk_signal_connect (pGTKOBJECT (ssbutton), 'clicked', GTK_SIGNAL_FUNC (@subngliste), NULL); gtk_box_pack_start_defaults(GTK_BOX(vbox), mainlabel); gtk_box_pack_start_defaults(GTK_BOX(vbox), progress); gtk_box_pack_start_defaults(GTK_BOX(vbox), hbox); gtk_box_pack_start_defaults(GTK_BOX(hbox), fetchbutton); gtk_box_pack_start_defaults(GTK_BOX(hbox), ssbutton); gtk_box_pack_start_defaults(GTK_BOX(hbox), confbutton); gtk_box_pack_start_defaults(GTK_BOX(hbox), postbutton); gtk_box_pack_start_defaults(GTK_BOX(hbox), getlistbutton); gtk_box_pack_start_defaults(GTK_BOX(hbox), quitbutton); gtk_progress_set_show_text(GTK_PROGRESS(progress),1); gtk_widget_show (progress); gtk_widget_show (mainlabel); gtk_widget_show (fetchbutton); gtk_widget_show (ssbutton); gtk_widget_show (confbutton); gtk_widget_show (postbutton); gtk_widget_show (getlistbutton); gtk_widget_show (quitbutton); gtk_widget_show (vbox); gtk_widget_show (hbox); gtk_container_add (GTK_CONTAINER (window), vbox); gtk_widget_hide (progress); gtk_widget_show (window); gtk_main (); end. gfetchnews-0.2/nntp.pas0100644000175000017500000001310607315433261014236 0ustar henryhenryunit nntp; {$MODE DELPHI} interface uses sockets,errors,inet,sysutils,Classes; var host: THost; Addr : TInetSockAddr; S: LongInt; Sin,Sout : Text; line: string; i: integer; home,nbl: string; function nntp_connect(hostname: string;port: integer):boolean; function nntp_auth(user,pass:string):boolean; function nntp_list(newsbl: string):boolean; function nntp_gethead(num:LongInt;var head: TStringList):boolean; function nntp_getbody(num:LongInt;var body: TStringList):boolean; function nntp_post(var artcl: TStringList):boolean; function nntp_chgroup(group:string; var gesamt,von,bis:integer):boolean; procedure nntp_quit; implementation function ParseResult(s:string):integer; var p: integer; begin ParseResult:= -1; s:= Trim(s); if s='' then exit; if s[1]='.' then ParseResult:= 0 else begin p:= pos(' ',s); if p=0 then p:= pos(#9,s); if p=0 then ParseResult:= StrToIntDef(s,-1) else ParseResult:= StrToIntDef(Copy(s,1,p-1),-1); end; end; function nntp_connect(hostname: string;port: integer):boolean; begin Host.NameLookup(hostname); If Host.LastError<>0 then begin writeln ('Unknown host : ',hostname); nntp_connect:=false; exit; end; Addr.family:=AF_INET; Addr.port:=ShortHostToNet(port); Addr.addr:=HostTonet(Longint(Host.IPAddress)); S:=Socket(AF_INET,SOCK_STREAM,0); If Not Connect (S,ADDR,SIN,SOUT) then begin Writeln ('Could not connect to ', hostname ); Writeln ('Socket error : ',strerror(SocketError)); nntp_connect:=false; exit; end; rewrite (sout); reset(sin); readln (Sin,line); nntp_connect:=true; end; function nntp_auth(user,pass:string):boolean; var code: integer; send_command: string; begin nntp_auth:=false; send_command:='AUTHINFO SIMPLE '+user+' '+pass; writeln (sout,send_command); flush(sout); readln (Sin,line); code:=Parseresult(line); If (code<200) or (code>299) then begin nntp_auth:=false; end else begin nntp_auth:=true; end; end; function nntp_post(var artcl: TStringList):boolean; var code,z: integer; send_command: string; begin nntp_post:=false; send_command:='POST'; writeln (sout,send_command); flush(sout); readln (Sin,line); code:=Parseresult(line); If (code<200) or (code>340) then begin nntp_post:=false; exit; end; for z:=0 to artcl.count -1 do begin send_command:=artcl.strings[z]; writeln (sout,send_command); flush(sout); end; send_command:=''; writeln (sout,send_command); flush(sout); send_command:='.'; writeln (sout,send_command); flush(sout); readln (Sin,line); code:=Parseresult(line); If (code<200) or (code>299) then nntp_post:=false else nntp_post:=true; end; function nntp_chgroup(group:string;var gesamt,von,bis:integer):boolean; var code,z: integer; send_command, p: string; begin nntp_chgroup:=false; send_command:='GROUP '+group; writeln (sout,send_command); flush(sout); readln (Sin,line); code:=Parseresult(line); If (code<200) or (code>299) then begin nntp_chgroup:=false; end else begin Delete(line,1,4); line:=trim(line); p:= ''; z:=1; while not(copy(line,z,1)=' ') do begin p:=p+copy(line,z,1); z:=z+1; end; gesamt:=StrToInt(p); z:=z+1; p:= ''; while not(copy(line,z,1)=' ') do begin p:=p+copy(line,z,1); z:=z+1; end; von:=StrToInt(p); z:=z+1; p:= ''; while not(copy(line,z,1)=' ') do begin p:=p+copy(line,z,1); z:=z+1; end; bis:=StrToInt(p); nntp_chgroup:=true; end; end; function nntp_gethead(num:LongInt;var head: TStringList):boolean; var code: integer; send_command: string; begin head.clear; nntp_gethead:=false; send_command:='HEAD '+IntToStr(num); writeln (sout,send_command); flush(sout); readln (Sin,line); code:=Parseresult(line); If (code<200) or (code>299) then exit; while not (line='.') do begin readln (Sin, line); if line='.' then begin nntp_gethead:=true; end else begin head.Add(line); end; end; nntp_gethead:=true; end; function nntp_getbody(num:LongInt;var body: TStringList):boolean; var code: integer; send_command: string; begin body.clear; nntp_getbody:=false; send_command:='BODY '+IntToStr(num); writeln (sout,send_command); flush(sout); readln (Sin,line); code:=Parseresult(line); If (code<200) or (code>299) then exit; while not (line='.') do begin readln (Sin, line); if line='.' then begin nntp_getbody:=true; end else begin body.Add(line); end; end; nntp_getbody:=true; end; function nntp_list(newsbl: string):boolean; var code: integer; gruppe: string; GListe: TStringList; begin nntp_list:=false; GListe:=TStringList.create; GListe.clear; writeln (sout,'MODE READER'); flush(sout); readln (Sin,line); writeln (sout,'LIST'); flush(sout); readln (Sin,line); code:=Parseresult(line); If (code<200) or (code>299) then exit; repeat readln (Sin, line); code:=Parseresult(line); case code of -1: begin gruppe:=trim(line); i:= pos(#32,gruppe); if i=0 then i:= pos(#9,gruppe); if i>0 then SetLength(gruppe,i-1); if gruppe<>'' then GListe.Add(gruppe); end; 0: nntp_list:= true; else nntp_list:=false; end; until code<>-1; writeln ('Saving list to ',newsbl); try GListe.SaveToFile(newsbl); except nntp_list:=false; end; GListe.free; end; procedure nntp_quit; begin writeln (sout,'QUIT'); flush(sout); readln (Sin,line); end; initialization; end. gfetchnews-0.2/Makefile.fpc0100644000175000017500000000105407315717700014763 0ustar henryhenry[clean] units=nntp files=gfetchnews [dirs] fpcdir=/usr/lib/fpc targetdir=. [install] dirprefix=/usr/local [libs] needgcclib=1 needotherlib=1 [packages] packages=gtk,inet fcl=1 [targets] programs=gfetchnews gfetchnews-0.2/Makefile0100644000175000017500000006301407315717664014231 0ustar henryhenry# # Makefile generated by fpcmake v1.00 [2001/01/02] # defaultrule: all ##################################################################### # Autodetect OS (Linux or Dos or Windows NT or OS/2) # define inUnix when running under Unix (Linux,FreeBSD) # define inWinNT when running under WinNT # define inOS2 when running under OS/2 ##################################################################### # We need only / in the path override PATH:=$(subst \,/,$(PATH)) # Search for PWD and determine also if we are under linux PWD:=$(strip $(wildcard $(addsuffix /pwd.exe,$(subst ;, ,$(PATH))))) ifeq ($(PWD),) PWD:=$(strip $(wildcard $(addsuffix /pwd,$(subst :, ,$(PATH))))) ifeq ($(PWD),) nopwd: @echo You need the GNU utils package to use this Makefile! @echo Get ftp://ftp.freepascal.org/pub/fpc/dist/go32v2/utilgo32.zip @exit else inUnix=1 PWD:=$(firstword $(PWD)) endif else PWD:=$(firstword $(PWD)) endif # Detect NT - NT sets OS to Windows_NT # Detect OS/2 - OS/2 has OS2_SHELL defined ifndef inUnix ifeq ($(OS),Windows_NT) inWinNT=1 else ifdef OS2_SHELL inOS2=1 endif endif endif # The extension of executables ifdef inUnix SRCEXEEXT= else SRCEXEEXT=.exe endif # The path which is searched separated by spaces ifdef inUnix SEARCHPATH=$(subst :, ,$(PATH)) else SEARCHPATH=$(subst ;, ,$(PATH)) endif # Base dir ifdef PWD BASEDIR:=$(shell $(PWD)) else BASEDIR=. endif ##################################################################### # FPC version/target Detection ##################################################################### # What compiler to use ? ifndef FPC # Compatibility with old makefiles ifdef PP FPC=$(PP) else FPC=ppc386 endif endif override FPC:=$(subst $(SRCEXEEXT),,$(FPC)) override FPC:=$(subst \,/,$(FPC))$(SRCEXEEXT) # Target OS ifndef OS_TARGET OS_TARGET:=$(shell $(FPC) -iTO) endif # Source OS ifndef OS_SOURCE OS_SOURCE:=$(shell $(FPC) -iSO) endif # Target CPU ifndef CPU_TARGET CPU_TARGET:=$(shell $(FPC) -iTP) endif # Source CPU ifndef CPU_SOURCE CPU_SOURCE:=$(shell $(FPC) -iSP) endif # FPC version ifndef FPC_VERSION FPC_VERSION:=$(shell $(FPC) -iV) endif export FPC OS_TARGET OS_SOURCE CPU_TARGET CPU_SOURCE FPC_VERSION ##################################################################### # FPCDIR Setting ##################################################################### # Test FPCDIR to look if the RTL dir exists ifdef FPCDIR override FPCDIR:=$(subst \,/,$(FPCDIR)) ifeq ($(wildcard $(FPCDIR)/rtl),) ifeq ($(wildcard $(FPCDIR)/units),) override FPCDIR=wrong endif endif else override FPCDIR=wrong endif # Detect FPCDIR ifeq ($(FPCDIR),wrong) ifdef inUnix override FPCDIR=/usr/local/lib/fpc/$(FPC_VERSION) ifeq ($(wildcard $(FPCDIR)/units),) override FPCDIR=/usr/lib/fpc/$(FPC_VERSION) endif else override FPCDIR:=$(subst /$(FPC),,$(firstword $(strip $(wildcard $(addsuffix /$(FPC),$(SEARCHPATH)))))) override FPCDIR:=$(FPCDIR)/.. ifeq ($(wildcard $(FPCDIR)/rtl),) ifeq ($(wildcard $(FPCDIR)/units),) override FPCDIR:=$(FPCDIR)/.. ifeq ($(wildcard $(FPCDIR)/rtl),) ifeq ($(wildcard $(FPCDIR)/units),) override FPCDIR=c:/pp endif endif endif endif endif endif ifndef PACKAGESDIR PACKAGESDIR=$(FPCDIR)/packages endif ifndef TOOLKITSDIR TOOLKITSDIR= endif ifndef COMPONENTSDIR COMPONENTSDIR= endif # Create units dir ifneq ($(FPCDIR),.) UNITSDIR=$(FPCDIR)/units/$(OS_TARGET) endif ##################################################################### # User Settings ##################################################################### # Targets override EXEOBJECTS+=gfetchnews MANFILES=gfetchnews.1 # Clean override EXTRACLEANUNITS+=nntp override EXTRACLEANFILES+=gfetchnews # Install PREFIXINSTALLDIR=/usr/local MANINSTALLDIR=$(PREFIXINSTALLDIR)/share/man/man1 ZIPTARGET=install # Defaults # Directories # Packages override PACKAGES+=rtl # Libraries # Info INFOTARGET=fpc_infocfg fpc_infoobjects fpc_infoinstall ##################################################################### # Shell tools ##################################################################### # echo ifndef ECHO ECHO:=$(strip $(wildcard $(addsuffix /gecho$(EXEEXT),$(SEARCHPATH)))) ifeq ($(ECHO),) ECHO:=$(strip $(wildcard $(addsuffix /echo$(SRCEXEEXT),$(SEARCHPATH)))) ifeq ($(ECHO),) ECHO:=echo ECHOE:=echo else ECHO:=$(firstword $(ECHO)) ECHOE=$(ECHO) -E endif else ECHO:=$(firstword $(ECHO)) ECHOE=$(ECHO) -E endif endif # To copy pograms ifndef COPY COPY:=cp -fp endif # Copy a whole tree ifndef COPYTREE COPYTREE:=cp -rfp endif # To move pograms ifndef MOVE MOVE:=mv -f endif # Check delete program ifndef DEL DEL:=rm -f endif # Check deltree program ifndef DELTREE DELTREE:=rm -rf endif # To install files ifndef INSTALL ifdef inUnix INSTALL:=install -c -m 644 else INSTALL:=$(COPY) endif endif # To install programs ifndef INSTALLEXE ifdef inUnix INSTALLEXE:=install -c -m 755 else INSTALLEXE:=$(COPY) endif endif # To make a directory. ifndef MKDIR ifdef inUnix MKDIR:=install -m 755 -d else MKDIR:=ginstall -m 755 -d endif endif export ECHO ECHOE COPY COPYTREE MOVE DEL DELTREE INSTALL INSTALLEXE MKDIR ##################################################################### # Default Tools ##################################################################### # assembler, redefine it if cross compiling ifndef AS AS=as endif # linker, but probably not used ifndef LD LD=ld endif # ppas.bat / ppas.sh ifdef inUnix PPAS=ppas.sh else ifdef inOS2 PPAS=ppas.cmd else PPAS=ppas.bat endif endif # ldconfig to rebuild .so cache ifdef inUnix LDCONFIG=ldconfig else LDCONFIG= endif # ppumove ifndef PPUMOVE PPUMOVE:=$(strip $(wildcard $(addsuffix /ppumove$(SRCEXEEXT),$(SEARCHPATH)))) ifeq ($(PPUMOVE),) PPUMOVE= else PPUMOVE:=$(firstword $(PPUMOVE)) endif endif export PPUMOVE # ppufiles ifndef PPUFILES PPUFILES:=$(strip $(wildcard $(addsuffix /ppufiles$(SRCEXEEXT),$(SEARCHPATH)))) ifeq ($(PPUFILES),) PPUFILES= else PPUFILES:=$(firstword $(PPUFILES)) endif endif export PPUFILES # Look if UPX is found for go32v2 and win32. We can't use $UPX becuase # upx uses that one itself (PFV) ifndef UPXPROG ifeq ($(OS_TARGET),go32v2) UPXPROG:=1 endif ifeq ($(OS_TARGET),win32) UPXPROG:=1 endif ifdef UPXPROG UPXPROG:=$(strip $(wildcard $(addsuffix /upx$(SRCEXEEXT),$(SEARCHPATH)))) ifeq ($(UPXPROG),) UPXPROG= else UPXPROG:=$(firstword $(UPXPROG)) endif else UPXPROG= endif endif export UPXPROG # ZipProg, you can't use Zip as the var name (PFV) ifndef ZIPPROG ZIPPROG:=$(strip $(wildcard $(addsuffix /zip$(SRCEXEEXT),$(SEARCHPATH)))) ifeq ($(ZIPPROG),) ZIPPROG= else ZIPPROG:=$(firstword $(ZIPPROG)) endif endif export ZIPPROG ZIPOPT=-9 ZIPEXT=.zip # Tar ifndef TARPROG TARPROG:=$(strip $(wildcard $(addsuffix /tar$(SRCEXEEXT),$(SEARCHPATH)))) ifeq ($(TARPROG),) TARPROG= else TARPROG:=$(firstword $(TARPROG)) endif endif export TARPROG ifeq ($(USETAR),bz2) TAROPT=vI TAREXT=.tar.bz2 else TAROPT=vz TAREXT=.tar.gz endif ##################################################################### # Default extensions ##################################################################### # Default needed extensions (Go32v2,Linux) LOADEREXT=.as EXEEXT=.exe PPLEXT=.ppl PPUEXT=.ppu OEXT=.o ASMEXT=.s SMARTEXT=.sl STATICLIBEXT=.a SHAREDLIBEXT=.so RSTEXT=.rst FPCMADE=fpcmade # Go32v1 ifeq ($(OS_TARGET),go32v1) PPUEXT=.pp1 OEXT=.o1 ASMEXT=.s1 SMARTEXT=.sl1 STATICLIBEXT=.a1 SHAREDLIBEXT=.so1 FPCMADE=fpcmade.v1 endif # Go32v2 ifeq ($(OS_TARGET),go32v2) FPCMADE=fpcmade.dos endif # Linux ifeq ($(OS_TARGET),linux) EXEEXT= HASSHAREDLIB=1 FPCMADE=fpcmade.lnx endif # Linux ifeq ($(OS_TARGET),freebsd) EXEEXT= HASSHAREDLIB=1 FPCMADE=fpcmade.freebsd endif # Win32 ifeq ($(OS_TARGET),win32) PPUEXT=.ppw OEXT=.ow ASMEXT=.sw SMARTEXT=.slw STATICLIBEXT=.aw SHAREDLIBEXT=.dll FPCMADE=fpcmade.w32 endif # OS/2 ifeq ($(OS_TARGET),os2) PPUEXT=.ppo ASMEXT=.so2 OEXT=.oo2 SMARTEXT=.so STATICLIBEXT=.ao2 SHAREDLIBEXT=.dll FPCMADE=fpcmade.os2 endif # library prefix LIBPREFIX=lib ifeq ($(OS_TARGET),go32v2) LIBPREFIX= endif ifeq ($(OS_TARGET),go32v1) LIBPREFIX= endif # determine which .pas extension is used ifndef PASEXT ifdef EXEOBJECTS override TESTPAS:=$(strip $(wildcard $(addsuffix .pas,$(firstword $(EXEOBJECTS))))) else override TESTPAS:=$(strip $(wildcard $(addsuffix .pas,$(firstword $(UNITOBJECTS))))) endif ifeq ($(TESTPAS),) PASEXT=.pp else PASEXT=.pas endif endif # Check if the dirs really exists, else turn it off ifeq ($(wildcard $(UNITSDIR)),) UNITSDIR= endif ifeq ($(wildcard $(TOOLKITSDIR)),) TOOLKITSDIR= endif ifeq ($(wildcard $(PACKAGESDIR)),) PACKAGESDIR= endif ifeq ($(wildcard $(COMPONENTSDIR)),) COMPONENTSDIR= endif # PACKAGESDIR packages PACKAGERTL=1 ifdef PACKAGERTL ifneq ($(wildcard $(FPCDIR)/rtl),) ifneq ($(wildcard $(FPCDIR)/rtl/$(OS_TARGET)),) PACKAGEDIR_RTL=$(FPCDIR)/rtl/$(OS_TARGET) else PACKAGEDIR_RTL=$(FPCDIR)/rtl endif ifeq ($(wildcard $(PACKAGEDIR_RTL)/$(FPCMADE)),) override COMPILEPACKAGES+=package_rtl package_rtl: $(MAKE) -C $(PACKAGEDIR_RTL) all endif UNITDIR_RTL=$(PACKAGEDIR_RTL) else PACKAGEDIR_RTL= ifneq ($(wildcard $(UNITSDIR)/rtl),) ifneq ($(wildcard $(UNITSDIR)/rtl/$(OS_TARGET)),) UNITDIR_RTL=$(UNITSDIR)/rtl/$(OS_TARGET) else UNITDIR_RTL=$(UNITSDIR)/rtl endif else UNITDIR_RTL= endif endif ifdef UNITDIR_RTL override NEEDUNITDIR+=$(UNITDIR_RTL) endif endif ##################################################################### # Default Directories ##################################################################### # Linux and freebsd use unix dirs with /usr/bin, /usr/lib # When zipping use the target as default, when normal install then # use the source os as default ifdef ZIPNAME # Zipinstall ifeq ($(OS_TARGET),linux) UNIXINSTALLDIR=1 endif ifeq ($(OS_TARGET),freebsd) UNIXINSTALLDIR=1 endif else # Normal install ifeq ($(OS_SOURCE),linux) UNIXINSTALLDIR=1 endif ifeq ($(OS_SOURCE),freebsd) UNIXINSTALLDIR=1 endif endif # set the prefix directory where to install everything ifndef PREFIXINSTALLDIR ifdef UNIXINSTALLDIR PREFIXINSTALLDIR=/usr else PREFIXINSTALLDIR=/pp endif endif export PREFIXINSTALLDIR # Where to place the resulting zip files ifndef DESTZIPDIR DESTZIPDIR:=$(BASEDIR) endif export DESTZIPDIR ##################################################################### # Install Directories ##################################################################### # set the base directory where to install everything ifndef BASEINSTALLDIR ifdef UNIXINSTALLDIR BASEINSTALLDIR=$(PREFIXINSTALLDIR)/lib/fpc/$(FPC_VERSION) else BASEINSTALLDIR=$(PREFIXINSTALLDIR) endif endif # set the directory where to install the binaries ifndef BININSTALLDIR ifdef UNIXINSTALLDIR BININSTALLDIR=$(PREFIXINSTALLDIR)/bin else BININSTALLDIR=$(BASEINSTALLDIR)/bin/$(OS_TARGET) endif endif # set the directory where to install the units. ifndef UNITINSTALLDIR UNITINSTALLDIR=$(BASEINSTALLDIR)/units/$(OS_TARGET) ifdef UNITSUBDIR UNITINSTALLDIR:=$(UNITINSTALLDIR)/$(UNITSUBDIR) endif endif # Where to install shared libraries ifndef LIBINSTALLDIR ifdef UNIXINSTALLDIR LIBINSTALLDIR=$(PREFIXINSTALLDIR)/lib else LIBINSTALLDIR=$(UNITINSTALLDIR) endif endif # Where the source files will be stored ifndef SOURCEINSTALLDIR ifdef UNIXINSTALLDIR SOURCEINSTALLDIR=$(PREFIXINSTALLDIR)/src/fpc-$(FPC_VERSION) else SOURCEINSTALLDIR=$(BASEINSTALLDIR)/source endif ifdef SOURCESUBDIR SOURCEINSTALLDIR:=$(SOURCEINSTALLDIR)/$(SOURCESUBDIR) endif endif # Where the doc files will be stored ifndef DOCINSTALLDIR ifdef UNIXINSTALLDIR DOCINSTALLDIR=$(PREFIXINSTALLDIR)/doc/fpc-$(FPC_VERSION) else DOCINSTALLDIR=$(BASEINSTALLDIR)/doc endif endif # Where to install the examples, under linux we use the doc dir # because the copytree command will create a subdir itself ifndef EXAMPLEINSTALLDIR ifdef UNIXINSTALLDIR EXAMPLEINSTALLDIR=$(DOCINSTALLDIR)/examples else EXAMPLEINSTALLDIR=$(BASEINSTALLDIR)/examples endif ifdef EXAMPLESUBDIR EXAMPLEINSTALLDIR:=$(EXAMPLEINSTALLDIR)/$(EXAMPLESUBDIR) endif endif # Where the some extra (data)files will be stored ifndef DATAINSTALLDIR DATAINSTALLDIR=$(BASEINSTALLDIR) endif ##################################################################### # Redirection ##################################################################### ifndef REDIRFILE REDIRFILE=log endif ifdef REDIR ifndef inUnix override FPC=redir -eo $(FPC) endif # set the verbosity to max override FPCOPT+=-va override REDIR:= >> $(REDIRFILE) endif ##################################################################### # Compiler Command Line ##################################################################### # Load commandline OPTDEF and add FPC_CPU define override FPCOPTDEF:=-d$(CPU_TARGET) # Load commandline OPT and add target and unit dir to be sure ifneq ($(OS_TARGET),$(OS_SOURCE)) override FPCOPT+=-T$(OS_TARGET) endif # User dirs should be first, so they are looked at first ifdef UNITDIR override FPCOPT+=$(addprefix -Fu,$(UNITDIR)) endif ifdef LIBDIR override FPCOPT+=$(addprefix -Fl,$(LIBDIR)) endif ifdef OBJDIR override FPCOPT+=$(addprefix -Fo,$(OBJDIR)) endif ifdef INCDIR override FPCOPT+=$(addprefix -Fi,$(INCDIR)) endif # Smartlinking ifdef LINKSMART override FPCOPT+=-XX endif # Smartlinking creation ifdef CREATESMART override FPCOPT+=-CX endif # Debug ifdef DEBUG override FPCOPT+=-gl -dDEBUG endif # Release mode (strip, optimize and don't load ppc386.cfg) # 0.99.12b has a bug in the optimizer so don't use it by default ifdef RELEASE ifeq ($(FPC_VERSION),0.99.12) override FPCOPT+=-Xs -OGp3 -n else override FPCOPT+=-Xs -OG2p3 -n endif endif # Strip ifdef STRIP override FPCOPT+=-Xs endif # Optimizer ifdef OPTIMIZE override FPCOPT+=-OG2p3 endif # Verbose settings (warning,note,info) ifdef VERBOSE override FPCOPT+=-vwni endif ifdef NEEDUNITDIR override FPCOPT+=$(addprefix -Fu,$(NEEDUNITDIR)) endif ifdef UNITSDIR override FPCOPT+=-Fu$(UNITSDIR) endif # Target dirs and the prefix to use for clean/install ifdef TARGETDIR override FPCOPT+=-FE$(TARGETDIR) ifeq ($(TARGETDIR),.) override TARGETDIRPREFIX= else override TARGETDIRPREFIX=$(TARGETDIR)/ endif endif ifdef UNITTARGETDIR override FPCOPT+=-FU$(UNITTARGETDIR) ifeq ($(UNITTARGETDIR),.) override UNITTARGETDIRPREFIX= else override UNITTARGETDIRPREFIX=$(TARGETDIR)/ endif else ifdef TARGETDIR override UNITTARGETDIR=$(TARGETDIR) override UNITTARGETDIRPREFIX=$(TARGETDIRPREFIX) endif endif # Add commandline options last so they can override ifdef OPT override FPCOPT+=$(OPT) endif # Add defines from FPCOPTDEF to FPCOPT ifdef FPCOPTDEF override FPCOPT+=$(FPCOPTDEF) endif # Error file ? ifdef ERRORFILE override FPCOPT+=-Fr$(ERRORFILE) endif # Was a config file specified ? ifdef CFGFILE override FPCOPT+=@$(CFGFILE) endif # For win32 the options are passed using the environment FPCEXTCMD ifeq ($(OS_SOURCE),win32) override FPCEXTCMD:=$(FPCOPT) override FPCOPT:=!FPCEXTCMD export FPCEXTCMD endif # Compiler commandline override COMPILER:=$(FPC) $(FPCOPT) # also call ppas if with command option -s # but only if the OS_SOURCE and OS_TARGE are equal ifeq (,$(findstring -s ,$(COMPILER))) EXECPPAS= else ifeq ($(OS_SOURCE),$(OS_TARGET)) EXECPPAS:=@$(PPAS) endif endif ##################################################################### # Standard rules ##################################################################### all: fpc_all debug: fpc_debug smart: fpc_smart shared: fpc_shared showinstall: fpc_showinstall install: fpc_install sourceinstall: fpc_sourceinstall exampleinstall: fpc_exampleinstall zipinstall: fpc_zipinstall zipsourceinstall: fpc_zipsourceinstall zipexampleinstall: fpc_zipexampleinstall clean: fpc_clean distclean: fpc_distclean cleanall: fpc_cleanall info: fpc_info .PHONY: all debug smart shared showinstall install sourceinstall exampleinstall zipinstall zipsourceinstall zipexampleinstall clean distclean cleanall info ##################################################################### # Exes ##################################################################### .PHONY: fpc_exes ifdef EXEOBJECTS override EXEFILES=$(addsuffix $(EXEEXT),$(EXEOBJECTS)) override EXEOFILES:=$(addsuffix $(OEXT),$(EXEOBJECTS)) $(addprefix $(LIBPREFIX),$(addsuffix $(STATICLIBEXT),$(EXEOBJECTS))) override ALLTARGET+=fpc_exes override INSTALLEXEFILES+=$(EXEFILES) override CLEANEXEFILES+=$(EXEFILES) $(EXEOFILES) endif fpc_exes: $(EXEFILES) ##################################################################### # General compile rules ##################################################################### .PHONY: fpc_packages fpc_all fpc_debug $(FPCMADE): $(ALLTARGET) @$(ECHO) Compiled > $(FPCMADE) fpc_packages: $(COMPILEPACKAGES) fpc_all: fpc_packages $(FPCMADE) fpc_debug: $(MAKE) all DEBUG=1 # Search paths for .ppu if targetdir is set ifdef UNITTARGETDIR vpath %$(PPUEXT) $(UNITTARGETDIR) endif # General compile rules, available for both possible PASEXT .SUFFIXES: $(EXEEXT) $(PPUEXT) $(OEXT) .pas .pp %$(PPUEXT): %.pp $(COMPILER) $< $(REDIR) $(EXECPPAS) %$(PPUEXT): %.pas $(COMPILER) $< $(REDIR) $(EXECPPAS) %$(EXEEXT): %.pp $(COMPILER) $< $(REDIR) $(EXECPPAS) %$(EXEEXT): %.pas $(COMPILER) $< $(REDIR) $(EXECPPAS) ##################################################################### # Library ##################################################################### .PHONY: fpc_smart fpc_shared ifdef LIBVERSION LIBFULLNAME=$(LIBNAME).$(LIBVERSION) else LIBFULLNAME=$(LIBNAME) endif # Default sharedlib units are all unit objects ifndef SHAREDLIBUNITOBJECTS SHAREDLIBUNITOBJECTS:=$(UNITOBJECTS) endif fpc_smart: $(MAKE) all LINKSMART=1 CREATESMART=1 fpc_shared: all ifdef HASSHAREDLIB ifndef LIBNAME @$(ECHO) "LIBNAME not set" else $(PPUMOVE) $(SHAREDLIBUNITOBJECTS) -o$(LIBFULLNAME) endif else @$(ECHO) "Shared Libraries not supported" endif ##################################################################### # Install rules ##################################################################### .PHONY: fpc_showinstall fpc_install ifdef EXTRAINSTALLUNITS override INSTALLPPUFILES+=$(addsuffix $(PPUEXT),$(EXTRAINSTALLUNITS)) endif ifdef INSTALLPPUFILES override INSTALLPPUFILES:=$(addprefix $(UNITTARGETDIRPREFIX),$(INSTALLPPUFILES)) ifdef PPUFILES INSTALLPPULINKFILES:=$(shell $(PPUFILES) -S -O $(INSTALLPPUFILES)) else INSTALLPPULINKFILES:=$(wildcard $(subst $(PPUEXT),$(OEXT),$(INSTALLPPUFILES)) $(addprefix $(LIBPREFIX),$(subst $(PPUEXT),$(STATICLIBEXT),$(INSTALLPPUFILES)))) endif override INSTALLPPULINKFILES:=$(addprefix $(UNITTARGETDIRPREFIX),$(INSTALLPPULINKFILES)) endif ifdef INSTALLEXEFILES override INSTALLEXEFILES:=$(addprefix $(TARGETDIRPREFIX),$(INSTALLEXEFILES)) endif fpc_showinstall: $(SHOWINSTALLTARGET) ifdef INSTALLEXEFILES @$(ECHO) -e $(addprefix "\n"$(BININSTALLDIR)/,$(INSTALLEXEFILES)) endif ifdef INSTALLPPUFILES @$(ECHO) -e $(addprefix "\n"$(UNITINSTALLDIR)/,$(INSTALLPPUFILES)) ifneq ($(INSTALLPPULINKFILES),) @$(ECHO) -e $(addprefix "\n"$(UNITINSTALLDIR)/,$(INSTALLPPULINKFILES)) endif ifneq ($(wildcard $(LIBFULLNAME)),) @$(ECHO) $(LIBINSTALLDIR)/$(LIBFULLNAME) ifdef HASSHAREDLIB @$(ECHO) $(LIBINSTALLDIR)/$(LIBNAME) endif endif endif ifdef EXTRAINSTALLFILES @$(ECHO) -e $(addprefix "\n"$(DATAINSTALLDIR)/,$(EXTRAINSTALLFILES)) endif fpc_install: $(INSTALLTARGET) $(MKDIR) $(MANINSTALLDIR) $(INSTALL) $(MANFILES) $(MANINSTALLDIR) # Create UnitInstallFiles ifdef INSTALLEXEFILES $(MKDIR) $(BININSTALLDIR) # Compress the exes if upx is defined ifdef UPXPROG -$(UPXPROG) $(INSTALLEXEFILES) endif $(INSTALLEXE) $(INSTALLEXEFILES) $(BININSTALLDIR) endif ifdef INSTALLPPUFILES $(MKDIR) $(UNITINSTALLDIR) $(INSTALL) $(INSTALLPPUFILES) $(UNITINSTALLDIR) ifneq ($(INSTALLPPULINKFILES),) $(INSTALL) $(INSTALLPPULINKFILES) $(UNITINSTALLDIR) endif ifneq ($(wildcard $(LIBFULLNAME)),) $(MKDIR) $(LIBINSTALLDIR) $(INSTALL) $(LIBFULLNAME) $(LIBINSTALLDIR) ifdef inUnix ln -sf $(LIBFULLNAME) $(LIBINSTALLDIR)/$(LIBNAME) endif endif endif ifdef EXTRAINSTALLFILES $(MKDIR) $(DATAINSTALLDIR) $(INSTALL) $(EXTRAINSTALLFILES) $(DATAINSTALLDIR) endif ##################################################################### # SourceInstall rules ##################################################################### .PHONY: fpc_sourceinstall ifndef SOURCETOPDIR SOURCETOPDIR=$(BASEDIR) endif fpc_sourceinstall: clean $(MKDIR) $(SOURCEINSTALLDIR) $(COPYTREE) $(SOURCETOPDIR) $(SOURCEINSTALLDIR) ##################################################################### # exampleinstall rules ##################################################################### .PHONY: fpc_exampleinstall fpc_exampleinstall: $(addsuffix _clean,$(EXAMPLEDIROBJECTS)) ifdef EXAMPLESOURCEFILES $(MKDIR) $(EXAMPLEINSTALLDIR) $(COPY) $(EXAMPLESOURCEFILES) $(EXAMPLEINSTALLDIR) endif ifdef EXAMPLEDIROBJECTS ifndef EXAMPLESOURCEFILES $(MKDIR) $(EXAMPLEINSTALLDIR) endif $(COPYTREE) $(addsuffix /*,$(EXAMPLEDIROBJECTS)) $(EXAMPLEINSTALLDIR) endif ##################################################################### # Zip ##################################################################### .PHONY: fpc_zipinstall # Create suffix to add ifndef PACKAGESUFFIX PACKAGESUFFIX=$(OS_TARGET) ifeq ($(OS_TARGET),go32v2) PACKAGESUFFIX=go32 endif ifeq ($(OS_TARGET),win32) PACKAGESUFFIX=w32 endif ifeq ($(OS_TARGET),os2) PACKAGESUFFIX=emx endif endif # Temporary path to pack a file ifndef PACKDIR ifndef inUnix PACKDIR=$(BASEDIR)/pack_tmp else PACKDIR=/tmp/fpc-pack endif endif # Maybe create default zipname from packagename ifndef ZIPNAME ifdef PACKAGENAME ZIPNAME=$(PACKAGEPREFIX)$(PACKAGENAME)$(PACKAGESUFFIX) endif endif # Use tar by default under linux ifndef USEZIP ifdef inUnix USETAR=1 endif endif fpc_zipinstall: ifndef ZIPNAME @$(ECHO) "Please specify ZIPNAME!" @exit 1 else $(MAKE) $(ZIPTARGET) PREFIXINSTALLDIR=$(PACKDIR) ifdef USETAR $(DEL) $(DESTZIPDIR)/$(ZIPNAME)$(TAREXT) cd $(PACKDIR) ; $(TARPROG) cf$(TAROPT) $(DESTZIPDIR)/$(ZIPNAME)$(TAREXT) * ; cd $(BASEDIR) else $(DEL) $(DESTZIPDIR)/$(ZIPNAME)$(ZIPEXT) cd $(PACKDIR) ; $(ZIPPROG) -Dr $(ZIPOPT) $(DESTZIPDIR)/$(ZIPNAME)$(ZIPEXT) * ; cd $(BASEDIR) endif $(DELTREE) $(PACKDIR) endif .PHONY: fpc_zipsourceinstall fpc_zipsourceinstall: $(MAKE) fpc_zipinstall ZIPTARGET=sourceinstall PACKAGESUFFIX=src .PHONY: fpc_zipexampleinstall fpc_zipexampleinstall: $(MAKE) fpc_zipinstall ZIPTARGET=exampleinstall PACKAGESUFFIX=exm ##################################################################### # Clean rules ##################################################################### .PHONY: fpc_clean fpc_cleanall fpc_distclean ifdef EXEFILES override CLEANEXEFILES:=$(addprefix $(TARGETDIRPREFIX),$(CLEANEXEFILES)) endif ifdef EXTRACLEANUNITS override CLEANPPUFILES+=$(addsuffix $(PPUEXT),$(EXTRACLEANUNITS)) endif ifdef CLEANPPUFILES override CLEANPPUFILES:=$(addprefix $(UNITTARGETDIRPREFIX),$(CLEANPPUFILES)) # Get the .o and .a files created for the units ifdef PPUFILES CLEANPPULINKFILES:=$(shell $(PPUFILES) $(CLEANPPUFILES)) else CLEANPPULINKFILES:=$(wildcard $(subst $(PPUEXT),$(OEXT),$(CLEANPPUFILES)) $(addprefix $(LIBPREFIX),$(subst $(PPUEXT),$(STATICLIBEXT),$(CLEANPPUFILES)))) endif override CLEANPPULINKFILES:=$(addprefix $(UNITTARGETDIRPREFIX),$(CLEANPPULINKFILES)) endif fpc_clean: $(CLEANTARGET) ifdef CLEANEXEFILES -$(DEL) $(CLEANEXEFILES) endif ifdef CLEANPPUFILES -$(DEL) $(CLEANPPUFILES) endif ifneq ($(CLEANPPULINKFILES),) -$(DEL) $(CLEANPPULINKFILES) endif ifdef CLEANRSTFILES -$(DEL) $(addprefix $(UNITTARGETDIRPREFIX),$(CLEANRSTFILES)) endif ifdef EXTRACLEANFILES -$(DEL) $(EXTRACLEANFILES) endif ifdef LIBNAME -$(DEL) $(LIBNAME) $(LIBFULLNAME) endif -$(DEL) $(FPCMADE) $(PPAS) link.res $(FPCEXTFILE) $(REDIRFILE) fpc_distclean: fpc_clean # Also run clean first if targetdir is set. Unittargetdir is always # set if targetdir or unittargetdir is specified ifdef UNITTARGETDIR TARGETDIRCLEAN=fpc_clean endif fpc_cleanall: $(CLEANTARGET) $(TARGETDIRCLEAN) ifdef CLEANEXEFILES -$(DEL) $(CLEANEXEFILES) endif -$(DEL) *$(OEXT) *$(PPUEXT) *$(RSTEXT) *$(ASMEXT) *$(STATICLIBEXT) *$(SHAREDLIBEXT) *$(PPLEXT) -$(DELTREE) *$(SMARTEXT) -$(DEL) $(FPCMADE) $(PPAS) link.res $(FPCEXTFILE) $(REDIRFILE) ##################################################################### # Info rules ##################################################################### .PHONY: fpc_info fpc_cfginfo fpc_objectinfo fpc_toolsinfo fpc_installinfo \ fpc_dirinfo fpc_info: $(INFOTARGET) fpc_infocfg: @$(ECHO) @$(ECHO) == Configuration info == @$(ECHO) @$(ECHO) FPC....... $(FPC) @$(ECHO) Version... $(FPC_VERSION) @$(ECHO) CPU....... $(CPU_TARGET) @$(ECHO) Source.... $(OS_SOURCE) @$(ECHO) Target.... $(OS_TARGET) @$(ECHO) fpc_infoobjects: @$(ECHO) @$(ECHO) == Object info == @$(ECHO) @$(ECHO) LoaderObjects..... $(LOADEROBJECTS) @$(ECHO) UnitObjects....... $(UNITOBJECTS) @$(ECHO) ExeObjects........ $(EXEOBJECTS) @$(ECHO) @$(ECHO) ExtraCleanUnits... $(EXTRACLEANUNITS) @$(ECHO) ExtraCleanFiles... $(EXTRACLEANFILES) @$(ECHO) @$(ECHO) ExtraInstallUnits. $(EXTRAINSTALLUNITS) @$(ECHO) ExtraInstallFiles. $(EXTRAINSTALLFILES) @$(ECHO) fpc_infoinstall: @$(ECHO) @$(ECHO) == Install info == @$(ECHO) ifdef DATE @$(ECHO) DateStr.............. $(DATESTR) endif ifdef PACKAGEPREFIX @$(ECHO) PackagePrefix........ $(PACKAGEPREFIX) endif ifdef PACKAGENAME @$(ECHO) PackageName.......... $(PACKAGENAME) endif @$(ECHO) PackageSuffix........ $(PACKAGESUFFIX) @$(ECHO) @$(ECHO) BaseInstallDir....... $(BASEINSTALLDIR) @$(ECHO) BinInstallDir........ $(BININSTALLDIR) @$(ECHO) LibInstallDir........ $(LIBINSTALLDIR) @$(ECHO) UnitInstallDir....... $(UNITINSTALLDIR) @$(ECHO) SourceInstallDir..... $(SOURCEINSTALLDIR) @$(ECHO) DocInstallDir........ $(DOCINSTALLDIR) @$(ECHO) DataInstallDir....... $(DATAINSTALLDIR) @$(ECHO) @$(ECHO) DestZipDir........... $(DESTZIPDIR) @$(ECHO) ZipName.............. $(ZIPNAME) @$(ECHO) ##################################################################### # Local Makefile ##################################################################### ifneq ($(wildcard fpcmake.loc),) include fpcmake.loc endif gfetchnews-0.2/gfetchnews.10100644000175000017500000000757707315701132015003 0ustar henryhenry.TH gfetchnews 1 .SH NAME gfetchnews \- A GTK NNTP client for fetching and posting UseNet news .SH SYNOPSIS .B gfetchnews [ .B options ] .SH DESCRIPTION .PP \fIgfetchnews\fP is a graphical NNTP Client. It fetches news from a news server and saves it into a mbox spool file. Additionally it can post news from a spool directory. As for version 0.2 gfetchnews was ported from Perl-GTK to Pascal. So you don't need extra modules anymore. .SH OPTIONS No commandline options, all is done from the GUI. .SH CONFIGURATION If $HOME/.gfnewsrc not exists, the Configuration is set to some default values. Please click the config button for configuration. .SH OPERATION .TP .BI Get\ newsgroup\ list This is the first thing to do. Just click on the 'Get newsgroup list' button. .TP .BI Subcribe\ to\ newsgroups Select a newsgroup from the list by mark it with the mouse. Then paste it (middle mouse button) in the field below. Enter how many articles should be initially fetched an click OK. .TP .BI Fetch\ news Just click the button. The news are stored in $HOME/gfnewsin/gf-* in mbox format. Many mailreaders can read mbox, e. g. mutt, netscape, kmail, etc.pp. .TP .BI Post\ articles The postings are expected in $HOME/gfnewsout and must be in newspostings format according to RFC 1036, which looks like this From: jerry@eagle.ATT.COM (Jerry Schwarz) Path: cbosgd!mhuxj!mhuxt!eagle!jerry Newsgroups: news.announce Subject: Usenet Etiquette -- Please Read Message-ID: <642@eagle.ATT.COM> Date: Fri, 19 Nov 82 16:14:55 GMT Followup-To: news.misc Expires: Sat, 1 Jan 83 00:00:00 -0500 Organization: AT&T Bell Laboratories, Murray Hill The body of the message comes here, after a blank line. Additionally the file which containes must be named n*.out, (one file for each posting). .SH REQUIREMENTS - gtk .SH FILES AND DIRECTORIES .PD 0 .TP .I $HOME/gfnewsout This is where outgoing newspostings are expected. .TP .I $HOME/gfnewsin This is where the news are stored. They are in the gf- files, These files are in mbox format, which can be read by many mbox capable readers (e.g. mutt). .TP .I $HOME/.gfnewsrc The main configuration file of gfetchnews. The format is very simple: # The news server, something like news.cis.dfn.de NntpServer= # The port, usually 119 NntpPort=119 # If your news server requires authorizathion, you enter the values. # Otherwise leave empty NntpUser= NntpPass= .TP .I $HOME/.gfnews.rc Your subscribed newsgroupfile, the format is where number is the last read counter. A Zero means "set this newsgroup to the last available article (aka 'catch up'), a negative number means 'get this much articles from the server' (aka 'rescan'). .TP .I $HOME/.gfnews.bl This is a list with all available newsgroups. .SH COPYRIGHT This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. .SH TODO - make nicer buttons:-) - your suggestions .SH BUGS Send me reports. .SH AUTHORS Henry Jensen gfetchnews-0.2/LICENSE0100644000175000017500000003560507306424402013564 0ustar henryhenry GNU GENERAL PUBLIC LICENSE Version 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc. 675 Mass Ave, Cambridge, MA 02139, USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. Preamble The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public License is intended to guarantee your freedom to share and change free software--to make sure the software is free for all its users. This General Public License applies to most of the Free Software Foundation's software and to any other program whose authors commit to using it. (Some other Free Software Foundation software is covered by the GNU Library General Public License instead.) You can apply it to your programs, too. When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish), that you receive source code or can get it if you want it, that you can change the software or use pieces of it in new free programs; and that you know you can do these things. To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender the rights. These restrictions translate to certain responsibilities for you if you distribute copies of the software, or if you modify it. For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all the rights that you have. You must make sure that they, too, receive or can get the source code. And you must show them these terms so they know their rights. We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal permission to copy, distribute and/or modify the software. Also, for each author's protection and ours, we want to make certain that everyone understands that there is no warranty for this free software. If the software is modified by someone else and passed on, we want its recipients to know that what they have is not the original, so that any problems introduced by others will not reflect on the original authors' reputations. Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that redistributors of a free program will individually obtain patent licenses, in effect making the program proprietary. To prevent this, we have made it clear that any patent must be licensed for everyone's free use or not licensed at all. The precise terms and conditions for copying, distribution and modification follow. GNU GENERAL PUBLIC LICENSE TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION 0. This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed under the terms of this General Public License. The "Program", below, refers to any such program or work, and a "work based on the Program" means either the Program or any derivative work under copyright law: that is to say, a work containing the Program or a portion of it, either verbatim or with modifications and/or translated into another language. (Hereinafter, translation is included without limitation in the term "modification".) Each licensee is addressed as "you". Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running the Program is not restricted, and the output from the Program is covered only if its contents constitute a work based on the Program (independent of having been made by running the Program). Whether that is true depends on what the Program does. 1. You may copy and distribute verbatim copies of the Program's source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and give any other recipients of the Program a copy of this License along with the Program. You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee. 2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the Program, and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions: a) You must cause the modified files to carry prominent notices stating that you changed the files and the date of any change. b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the Program or any part thereof, to be licensed as a whole at no charge to all third parties under the terms of this License. c) If the modified program normally reads commands interactively when run, you must cause it, when started running for such interactive use in the most ordinary way, to print or display an announcement including an appropriate copyright notice and a notice that there is no warranty (or else, saying that you provide a warranty) and that users may redistribute the program under the program under these conditions, and telling the user how to view a copy of this License. (Exception: if the Program itself is interactive but does not normally print such an announcement, your work based on the Program is not required to print an announcement.) These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Program, and can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same sections as part of a whole which is a work based on the Program, the distribution of the whole must be on the terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it. Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the Program. In addition, mere aggregation of another work not based on the Program with the Program (or with a work based on the Program) on a volume of a storage or distribution medium does not bring the other work under the scope of this License. 3. You may copy and distribute the Program (or a work based on it, under Section 2) in object code or executable form under the terms of Sections 1 and 2 above provided that you also do one of the following: a) Accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or, b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more than your cost of physically performing source distribution, a complete machine-readable copy of the corresponding source code, to be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or, c) Accompany it with the information you received as to the offer to distribute corresponding source code. (This alternative is allowed only for noncommercial distribution and only if you received the program in object code or executable form with such an offer, in accord with Subsection b above.) The source code for a work means the preferred form of the work for making modifications to it. For an executable work, complete source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the executable. However, as a special exception, the source code distributed need not include anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies the executable. If distribution of executable or object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place counts as distribution of the source code, even though third parties are not compelled to copy the source along with the object code. 4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this License. Any attempt otherwise to copy, modify, sublicense or distribute the Program is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance. 5. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Program or its derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Program (or any work based on the Program), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Program or works based on it. 6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You may not impose any further restrictions on the recipients' exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties to this License. 7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not distribute the Program at all. For example, if a patent license would not permit royalty-free redistribution of the Program by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Program. If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply and the section as a whole is intended to apply in other circumstances. It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution system, which is implemented by public license practices. Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice. This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License. 8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Program under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this License. 9. The Free Software Foundation may publish revised and/or new versions of the General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number. If the Program specifies a version number of this License which applies to it and "any later version", you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation. If the Program does not specify a version number of this License, you may choose any version ever published by the Free Software Foundation. 10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally. NO WARRANTY 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. END OF TERMS AND CONDITIONS gfetchnews-0.2/README0100644000175000017500000000016507315700616013434 0ustar henryhenryTo compile and install gfetchnews simply run make && make install. For documentation see the manfile gfetchnews (1) gfetchnews-0.2/ChangeLog0100644000175000017500000000035507315700427014327 0ustar henryhenry2001-06-26 Henry Jensen * ported to Pascal * Speed improvements 2001-06-05 Henry Jensen * initial release 0.1, supports fetching and posting news and subscriptions from the GUI